powder coated rim Archives

Powder Coating Confidential: How to avoid problems with your powder coater

July 20, 2018 by pcnearme

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.17.4″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ z_index_tablet=”500″ global_colors_info=”{}” sticky_enabled=”0″]

Troubleshooting is the most overlooked aspect of powder coating

Going over what your getting is important as much as what to go over when working with a powder coater. The most overlooked aspect of powder coating is knowing the level of restoration you’re going to get for that perfect powder coat finish.

When going to your local coater be sure to ask how they go about restoring your project. Most quality custom coaters use a 5-stage restoration process to make sure your project gets done right. When you’re working on your prized or sentimental project it’s important to know that you’re getting it done right so be sure ask so you know what you’re getting into because restoration can be expensive and time-consuming.

[embedyt] https://www.youtube.com/watch?v=Uok4-oZyzGI&width=1080&height=608&iv_load_policy=3&rel=0&showinfo=0[/embedyt]

1. Stripping is a chemical process using a compound called methylene chloride which activates the paint to bubble up and pull away from the surface to be removed with an abrasive tool like steel brush, steel wool or paint scraper.

2. Blasting through a pressure pot at a high psi(air pressure) and is next to help remove the excess paint left over from stripping and raise the metal surface to bond better to the new coating. There are few different kinds of media available which when combined with pressurized air become the ideal dry prep

3. Metal Prep Wash should be used especially when older metal or grimy parts are being done. There are (alkaline) salt remover solutions and acid-based solutions depending on the type of metal being powder coated. They help in removing extra fine debris and mil-scale rust or corrosion not seen by the naked eye.

4. Powder Coat & Curing is by where the metal is electrically charged to attract the powder particles then baked at temperatures not exceeding 500 degrees with specific time limits. When the powder is cured it means that the powder has bonded together(flowed out) and fully harden when the metal cools

5. Inspection is the very last step to ensure that the finish is lacking cross-contamination and other surface issues like outgassing, peeling, and fish-eye which can be common issues in restoration. Be sure to go over your project with you powder coater at the time of pick up.

A final note: To help customers search for quality coatings there are powder coater member groups which custom coaters can be affiliated. One of them is called the Powder Coating Institute (PCI). A hallmark of PCI is their Powder Coated Tough Mark. It is used by coaters and manufacturers to make consumers aware that their products are finished with this environmentally friendly process.

PCI Gold -Since 2017

For a simple directory, search nationally by going to Powder Coating Near Me. Those needing powder coating services can search this directory for coaters in their area who are committed to providing a certain types of specialty.

Click to Download

[/et_pb_text][et_pb_text admin_label=”MPW Guide form mobile” _builder_version=”4.14.7″ global_module=”12668″ saved_tabs=”all” global_colors_info=”{}”]

[/et_pb_text][et_pb_text admin_label=”2022 blog wrap up” _builder_version=”4.17.3″ global_module=”18725″ saved_tabs=”all” global_colors_info=”{}”]

About us

RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers & powder coaters can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast

Connect with us. Comment below. What would you like to know more about? I love to answer everyday questions to the consumer market wants to know about powder coating.

MAUIPOWDERWORKS.COM
Copyright 2016-2022©
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Top 10 facts about powder coating

March 6, 2018 by pcnearme

[et_pb_section fb_built=”1″ _builder_version=”3.22″][et_pb_row _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text _builder_version=”3.29.3″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”]

How powder coating works

If you haven’t heard powder coating is a fast-growing industry. More and more people are coming to custom powder coaters to get their everyday metal projects done. Here are the top 10 facts on the process of powder coating and the most frequently asked questions about it.

1. WHY POWDER COAT? A powder coated finish offers superior scratch, impact and chemical resistance to metal, wood & even glass products.

2. WHAT ARE EVERYDAY USES? Powder coating is used in automotive, industrial applications for personal, residential & commercial metal projects.

3. WHAT CAN BE POWDER COATED? Everything from rims to railings, gate, furniture, lighting, fixtures, furnishings, venting, auto & mechanical parts – just to name a few.

4. WHICH METALS CAN BE COATED? Aluminum, Galvanized Steel, Stainless & Steel Alloys and some solid Cast Metals. Provided it can hold an electrostatic charge.

5. WHAT POWDERS ARE BEST? Although there are indoor powders, outdoor-rated powders like TGIC, Polyesters & Urethanes have the most functionality.

6. WHAT ARE FINISHES AVAILABLE? Smooth, textured, hammer tone and veins-just to name a few. Smooth finishes come in Super Mirror, Semi-Gloss, Satin & Matte.

7. HOW IS IT APPLIED? Through a process of electrolysis whereby the metal and powder is charged and then cured in an oven up to 400 degrees.[/et_pb_text][et_pb_text admin_label=”MPW Blog Form Mobile” _builder_version=”3.29.3″ global_module=”12659″ saved_tabs=”all”]
[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_3,2_3″ _builder_version=”3.29.3″][et_pb_column type=”1_3″ _builder_version=”3.29.3″][et_pb_divider show_divider=”off” _builder_version=”3.29.3″][/et_pb_divider][et_pb_text _builder_version=”3.29.3″]

Top 10 Facts

Get more even more specific answers on our FAQs page.

8. HOW LONG DOES IT TAKE TO CURE? Not that long, depending on the size & weight it can take as little as 30min. What’s important is that the powder ‘flow out’ during the curing process.

9. HOW LONG WILL IT LAST? Generally, metal coatings can last up to 10 years or longer depending on the environment, quality of coating & type of powder.

10. IS POWDER COATING SAFE? Yes, in fact, because of the low VOCs. When compared to liquid paint it is far safer for people & the environment.[/et_pb_text][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ saved_tabs=”all” global_module=”18725″]RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast

Connect with us. Comment below. What would you like to know more about? I love to answer everyday questions to the consumer market wants to know about powder coating.

MAUIPOWDERWORKS.COM
Copyright 2016-2020©
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

How do you maintain your powder coated metal parts or rims?

February 19, 2018 by pcnearme

Simple care instructions after your rims and metal parts come back from powder coating.

Use these basic steps to care for your rims after they have been powder coated.

You’ve just picked up your parts from the powder coater and put your bike or car together for a sweet ride this weekend but forgot to ask this important question from your custom coater.

How do you maintain your powder coated metal?

There are several ways to protect your powder coated project especially from the elements over time.

First off, some info on the powders themselves. Powder coating powders come in all ratings and types like TGIC, polyurethanes, polyesters, and hybrids.

There are many colors and styles including smooth, textured, hammer-tone, metallic, translucent & illusion. Learn more on the different powder colors and their specific applications.

The care and maintenance of powder coating should be very little especially if it was done by quality custom coater.

However, if that leaves you feeling a little unsettled this list of safe cleaning products will make you feel better about the care and maintenance of your metal project.

1. 1. 1. General Clean– use mild soap and water, preferably phosphate free.
    2. Deep Clean– use Simple Green or orange based cleaner that is diluted according to label instructions
    3. Protect Daily– use an emollient like WD-40 to protect it from grime or dirt build up in between cleanings
    4. Lasting Finish– use an automotive spray-on sealer for waterproofing

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”2_5,3_5″ _builder_version=”3.29.3″][et_pb_column type=”2_5″ _builder_version=”3.29.3″][et_pb_divider show_divider=”off” _builder_version=”3.29.3″][/et_pb_divider][et_pb_text _builder_version=”4.4.2″]

Download the infographic for free

[/et_pb_text][/et_pb_column][et_pb_column type=”3_5″ _builder_version=”3.29.3″][et_pb_text _builder_version=”3.29.3″][embedyt] https://www.youtube.com/watch?v=PpK4Siy2SNI&width=1080&height=810&iv_load_policy=3&rel=0[/embedyt][/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.29.3″][et_pb_column type=”4_4″ _builder_version=”3.29.3″][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ saved_tabs=”all” global_module=”18725″]RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast

Can you powder coat over powder coat?

November 14, 2017 by pcnearme

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22.3″][et_pb_row admin_label=”row” _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text _builder_version=”3.29.3″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” z_index_tablet=”500″]

When powder coating over existing powder coat

Hands down, one of the most frequently asked questions in this business on how powder coating works.

Yes! Typically if the coating is newer and recently powder coated. However, there are some variables that could play into whether you should coat over it or not.

Here are the top four things to consider when powder coating over powder coat.

Ask yourself

Is the current coating sound and without flaws? If the coated metal project has imperfections i.e. bubbling from outgassing, fish-eyeing or spots where the coating has resisted, recoating may not be the first solution.
Was it cured properly the first time? If the original coating hasn’t cured properly the first time recoating will not be the solution this time.
Is there existing rust or corrosion from exposure already? As expected re-coating would not be the solution here because powder coating does not stop the process of decay.
Is it a painted finish instead of being powder coated? Believe it or not, many customers bring in projects they assume to be powder coated when in fact they are painted. We find this especially in the outdoor furniture and fixture market because many of those products come from China and have the appearance of being powder coated when in fact they are not.

Determining these important features to your metal project is best left to the experts.

Something as easy as a color change or color match may not be so simple. It may, in fact, require a full restoration process.

Find out more about how long does it take to powder coat your rims about how to prep rims for powder coating and what products to use when degreasing rims before powder coating.

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”3_5,2_5″ _builder_version=”3.29.3″][et_pb_column type=”3_5″ _builder_version=”3.29.3″][et_pb_text _builder_version=”3.29.3″][embedyt] https://www.youtube.com/watch?v=tiLALB3qZh0&width=1080&height=810&iv_load_policy=3&rel=0[/embedyt][/et_pb_text][et_pb_text admin_label=”MPW Blog Form Mobile” _builder_version=”3.29.3″ global_module=”12659″ saved_tabs=”all”]
[/et_pb_text][/et_pb_column][et_pb_column type=”2_5″ _builder_version=”3.29.3″][et_pb_divider show_divider=”off” _builder_version=”3.29.3″][/et_pb_divider][et_pb_text _builder_version=”3.29.3″]

What do I need to do to prep my rims before getting them powder coated?

July 19, 2017 by pcnearme

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22″][et_pb_row admin_label=”row” _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”Text” _builder_version=”4.4.7″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”]

Powder coating your rims is a great way to update a truck, car or motorcycle.

Generally, custom coaters can offer services dismount and pre-prep services like de-greasing but it is always good to ask beforehand.

Some will either charge separately or include it in there pricing.

If your coater doesn’t provide these services you will need to do the following prep before bringing your project in.

Dismount the tires from all rims. DIY-ers usually have the know-how to do this but you can always drop by your local tire shop to get them dismounted. If you go this route, consider timing it with the replacement of your tires to save money on dismounting.
All TPMS sensors and weights need to be removed.
Remove the stems.
If bearings are present they will have to be removed.
Remove any excess grease and dirt; bring in a clean condition.

[/et_pb_text][et_pb_text admin_label=”MPW Guide form mobile” _builder_version=”4.0.9″ global_module=”12668″ saved_tabs=”all”]
[/et_pb_text][et_pb_text _builder_version=”4.4.7″]Check out more tips on the best type of products to use to de-grease before powder coating.[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_3,2_3″ _builder_version=”3.29.3″][et_pb_column type=”1_3″ _builder_version=”3.29.3″][et_pb_divider show_divider=”off” admin_label=”Divider” _builder_version=”3.29.3″][/et_pb_divider][et_pb_text _builder_version=”4.5.1″ hover_enabled=”0″]

Rim Prep 101

[/et_pb_text][/et_pb_column][et_pb_column type=”2_3″ _builder_version=”3.29.3″][et_pb_text _builder_version=”3.29.3″][embedyt] https://www.youtube.com/watch?v=tiLALB3qZh0&width=1080&height=810&iv_load_policy=3&rel=0[/embedyt][/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.29.3″][et_pb_column type=”4_4″ _builder_version=”3.29.3″][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ hover_enabled=”0″ saved_tabs=”all” global_module=”18725″]Maui Powder Works is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to our blog below.

How long does it take for the powder coat to dry?

October 11, 2016 by pcnearme

[et_pb_section fb_built=”1″ _builder_version=”3.22″][et_pb_row _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.3.2″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”]

Powder coated items do not dry like traditional paint.

Once an item is prepped (abrasive blasted then treated with a metal prep solution) it is then placed into one of our ovens.

When the item reaches its target temperature, the powder flows out and generally cured in 15-30 minutes.

Once the item is out of the oven and cooled, it can be put immediately back into service.

Check out our specific posts about wheel refinishing:[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.3.2″][et_pb_column type=”4_4″ _builder_version=”4.3.2″][et_pb_text _builder_version=”4.3.2″]

prepping rims for restoration
which degreaser is best
can you powder coat over bondo
how long does it take to powder coat rims
how to maintain your powder coated metal

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.5.1″ _module_preset=”default”][et_pb_column type=”4_4″ _builder_version=”4.5.1″ _module_preset=”default”][et_pb_text _builder_version=”4.5.1″]Download this infographic[/et_pb_text][et_pb_image src=”https://mauipowderworks.com/wp-content/uploads/2018/03/Top-10-powder-coating-facts-120×300.png” url=”https://mauipowderworks.com/wp-content/uploads/2018/03/Top-10-powder-coating-facts-1.pdf” align=”center” _builder_version=”4.3.2″][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_5,3_5,1_5″ _builder_version=”4.3.2″][et_pb_column type=”1_5″ _builder_version=”4.3.2″][/et_pb_column][et_pb_column type=”3_5″ _builder_version=”4.3.2″][et_pb_text _builder_version=”4.3.2″][embedyt] https://www.youtube.com/embed?listType=playlist&list=PL5VhoP4pNEX9lqqCWqsSFyaIq-Z0g7V0s&v=NX1ykpyM5iM&layout=gallery[/embedyt]
[/et_pb_text][/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.3.2″][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.3.2″][et_pb_column type=”4_4″ _builder_version=”4.3.2″][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ saved_tabs=”all” global_module=”18725″]Maui Powder Works is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to our blog below.